The application scope of the Automotive Connector Dual Row Right Angle Pin Socket product is very wide and there are many types. According to the requirements of different applications, the corresponding Automotive Connector Dual Row Right Angle Pin Socket products can be selected to meet the requirements, but multiple application factors need to be considered

When it comes to the application aspects of wired connections, an important matter that the Automotive Connector Dual Row Right Angle Pin Socket usually needs to consider is ease of use. For example, the current-carrying capacity, signal density of the USBAutomotive Connector Dual Row Right Angle Pin Socket, and the reversible and directionless connection achieved through USB-C. On the contrary Keying and only allowing unidirectional direction-related Automotive Connector Dual Row Right Angle Pin Socket (such as the classic USB2.0Automotive Connector Dual Row Right Angle. Pin Socket helps guide users and prevent incorrect connections. Locked connections usually provide better mechanical support and may require crimping. If the Automotive Connector Dual Row Right Angle Pin Socket needs to be reused, then ease of use should of course be the top priority required by users.

2. Some applications require long-distance high-speed and reliable connections. Usually, the optical fiber Automotive Connector Dual Row Right Angle Pin Socket is used more frequently. There are mainly three types of optical fiber connections: single-mode, multi-mode and plastic optical fiber (POF). Multimode connections allow for higher bandwidth, but due to their high dispersion and attenuation rates, they are usually affected in long-distance applications, and thus are highly suitable for shorter LAN-based connections. Single-mode performs well over longer distances and is highly suitable for applications such as RF broadband. Furthermore, parallel data buses connected through peripheral component Interconnects (PCI), etc. are usually much faster than serial connections such as USB (although the USB-CAutomotive Connector Dual Row Right Angle Pin Socket also allows parallel connections).

3. When choosing the Automotive Connector Dual Row Right Angle Pin Socket for aerospace and military applications, the harsh operating conditions may require considering multiple problem requirements. Some Automotive Connector Dual Row Right Angle Pin Sockets have special protection against electromagnetic interference (EMI), electrostatic discharge (ESD), vibration and/or moisture. A common decision made by designers is whether the Automotive Connector Dual Row Right Angle Pin Socket should be shielded. The shielded Automotive Connector Dual Row Right Angle Pin Socket (covered with some conductive metals and possibly including EMI washers) can provide an additional level of protection against unnecessary radiation and local magnetic fields. However, compared with unshielded alternatives, It is usually larger in size or more expensive. Some Automotive Connector Dual Row Right Angle Pin Sockets even contain shock-absorbing contacts to help cope with high-impact and high-reliability applications, and connections that need to prevent external moisture usually contain (or allow) sealing.

4. For high-load applications, it is recommended to choose the Automotive Connector Dual Row Right Angle Pin Socket product with the maximum current or voltage rating. Some Automotive Connector Dual Row Right Angle Pin Sockets contain mixed-signal pins to support data and power connections. Typically, the power Pin has a larger current capacity and may be thicker, which helps prevent two separate power and data Automotive Connector Dual Row Right Angle Pin sockets.

Automotive Connector Dual Row Right Angle Pin Socket https://www.yztech-sz.com/Automotive-Connector-Dual-Row-Right-Angle-Pin-Socket-D17-01-12-PH254mm-2-18P.html